When deburring with a conventional reamer, the burr between the tool and the hole wall will roll up, which affects the machining process.

Compared with traditional reamers, the new EWR500 deburring reamer removes burrs more reliably. The pressure of the radial water outlet reduces the gap between the reamer and the other side of the hole wall. The contact pressure can remove the burr at the root. Because the hole wall is not damaged, the deburring reamer can also be used for assembly parts. The position and number of water outlets are determined by the requirements of the on-site application. Multiple water outlets ensure permanent contact pressure, which avoids pressure relief when drilling through the hole.

● The surface finish of the reamed hole is retained

● Quick movement outside the drilling hole ensures short processing time

● Flexibly adaptable diameter range